3 Extremely Useful DIY Plumbing Tips Everyone Should Know

DIY plumbing

Why pay the plumber, when you can do it all by yourself. It becomes a real menace to wait for the plumber, every time a problem arises in your plumbing system. In a century where expenses are so high, save your few bucks with a little knowledge and know-how about your plumbing system, its equipment and the related problems with easy solutions. The plumbing tips here are sponsored by Mississauga plumber:

1. Clearing clogged pores and uneven sprays of the shower head and faucets

Water quality varies in every zone. Though we received treated water in our houses, still depending on the hardness of water. Scales start to form in the various chambers of our plumbing equipment. The first sign of sedimentation appears when water spray from the shower heads and faucets, comes out uneven. If this problem isn’t addressed, gradually most of the pores get clogged up. It leads to build up of pressure inside the pipes, which might lead to bursting of the pipe. This problem can be solved with the magic of vinegar. Vinegar is readily available in every house hold, the ideal way is to use a shower cap or plastic, fill it with vinegar dip the clogged poured in the solution and leave it overnight. Vinegar reacts with the scale and breaks the lime. By day light the pores are cleaned, deposits are gone. They can be restored back to use.

2. Faulty Geyser? Here is the easiest repair

Geysers aren’t that complicated machines, yet many problems crop up when using one. Few of them need professional help from a plumber, while few can be solved in minutes. Firstly, fluctuating temperature, flow of very hot water. Even after the installation of new geyser, the temperature seems to be very high. No need to panic, every geyser has a pre installed setting for temperature, one needs to manually adjust the temperature range.  Once it is set to your desired degree, the water will flow fine. If your geyser stops heating water, one should check the circuit breaker. It is a safety feature. In case of overload, the circuit breaker saves the geyser from burn out and short circuit. Simply replacing the circuit breaker should solve your problem.

3. Clean clogged pipes and drains

This is a universal problem. In autumn, the dried leaves and debris play their role in clogging the drain. In winter, the water freezes thus breaking down whole the system. Plumber Toronto can help you with this problem. So let’s see how to get it cleaned. If the clogging is due to scale deposition, running of hot water and some cleaning solution in a high pressure helps clear the deposits. In case of debris, a vacuum zone is created, which bars the movement of the garbage. So a reverse suction should be used. Once cleaned, strainers should be installed. Now as winter approaches, the water starts to freeze. So the most logical of the solution is using jacketed or insulated pipes. Also valves can be used to cut out the unnecessary pipe ways.

So fold your sleeves up, and get it all done following the above tips.

 

Leave a Reply

Your email address will not be published. Required fields are marked *